Skip to content
Submit a quotation form and a member of our team will be in touch to assist you with your order
Submit a quotation form and a member of our team will be in touch to assist you with your order
GreyStuff sealant applied around cables in a DuctSeal duct sealing system

Duct Seals for Cables and Pipes

Stop water, gas, fire and rodents getting through cable and pipe ducts. Mechanical, re‑enterable and fire rated duct seals from Kraso and DuctSeal, rated from 1 to 10 bar, supplied across the UK.

Find My Seal
WIMES Compliant

Approved for the UK water industry

Up To 10 Bar

Watertight and gas‑tight

Up To 4 Hours

Fire resistance with DuctSeal FR

Free Site Surveys

+44 (0)161 874 1480

Which Duct Seal Do I Need?

Six types of duct seal, each made for a different job.
Pick the one that matches your duct, then choose the size.

Mechanical Duct Seals

Mechanical Duct Seals

Kraso compression seals for a single cable or pipe. Watertight and gas-tight, from 1 bar up to 10 bar.

View Products
Re-Enterable Duct Seals

Re-Enterable Duct Seals

DuctSeal LG and HG sleeves with GreyStuff sealant for several cables in one duct.

View Products
Fire Rated Duct Seals

Fire Rated Duct Seals

DuctSeal FR with RedStuff sealant, tested to BS EN 1366-3:2021. Up to 4 hours fire resistance.

View Products
Retrofit Split Duct Seals

Retrofit Split Duct Seals

Kraso Universal split seals that close around cables already installed, for 100 to 200mm ducts.

View Products
Duct Plugs

Duct Plugs

DuctPlug rubber expansion plugs seal empty, spare and open-ended ducts and pipes.

View Products
Gels And Resins

Gels And Resins

Shake'N'Fill re-enterable gel protects electrical connections against water, moisture and dust.

View Products
Not Sure Which Seal Fits?

Not Sure Which Seal Fits?

Enter your duct size and your cables, and we will show every seal that fits,
with the part number ready to quote.

Find My Seal

Duct Seals Compared

SystemPressure ratingFire ratedFits existing cablesBest for
Kraso Type ED, DD, VD, TD-X1, 3, 8 and 10 barNoUse Type UniversalA single cable or pipe in a duct or core hole
Kraso Type UniversalWatertight and gas-tightNoYes, split designRetrofits in 100 to 200mm ducts
DuctSeal LGUp to 1 barNoYesSeveral small cables under 25mm
DuctSeal HGUp to 2 barNoYesLarge, heavy cables and pipes
DuctSeal FRUp to 2 barUp to 4 hoursYesDucts that cross a fire compartment

Ratings are from the product pages. Ask us to confirm the right seal for your project.

Duct Seal HG - Installation Step: 6. Apply the GreyStuff or RedStuff sealant:

Expanding Foam Is Not A Duct Seal

Foam is quick, but it is not made to seal ducts. It can shrink and crack over time, letting water and gas back in, and it is not tested to duct sealing standards such as WIMES.

  • Tested pressure ratings, from 1 to 10 bar
  • Gas-tight against methane, hydrogen sulphide and chlorine
  • Re-enterable options, so cables can be added later
Read Why Foam Fails

Duct Seals By Industry

Guidance and approvals for the sectors we supply.

GreyStuff sealant applied around cables in a DuctSeal duct sealing system
Water Industry

Water Industry

WIMES compliant duct seals for water and wastewater sites and AMP8 projects.

Learn More
AC Cable Solutions Kraso Promo
Fuel Stations

Fuel Stations

Duct sealing for forecourts and fuel sites, in line with the APEA Blue Book.

Learn More
Hawke HTS transit frame sealing cables and pipes
Rail

Rail

Duct sealing systems for Network Rail projects.

Learn More

Duct Seal Questions

What is a duct seal?

A duct seal closes the gap between a duct and the cables or pipes inside it. It stops water, gas, fire, dust and rodents travelling along the duct into buildings, chambers and substations.

What size duct seal do I need?

Measure the inside diameter of the duct or core hole, and the outside diameter of each cable or pipe. Enter them in Find my seal, or send them with your quote request and we will confirm the part number.

Can I seal around cables that are already installed?

Yes. Kraso Type Universal split seals close around existing cables, and the DuctSeal sleeve and sealant systems are fitted around cables already in the duct.

Are your duct seals fire rated?

DuctSeal FR is tested to BS EN 1366-3:2021 at Warrington Fire and gives up to 4 hours of fire resistance. We also supply RedStuff sealant, FireStuff granulate and fire resistant grommets.

What pressure can a duct seal hold?

It depends on the system. DuctSeal LG holds up to 1 bar, DuctSeal HG and FR up to 2 bar, and Kraso mechanical seals from 1 bar (Type ED) up to 10 bar (Type TD-X).

Are your duct seals WIMES compliant?

Yes, our DuctSeal range is WIMES approved for the UK water industry. Ask us for the paperwork for your project.

Do you offer site surveys?

Yes, we offer free site surveys. Call us on +44 (0)161 874 1480, Monday to Friday 7.30am to 4.30pm, or request a quote online.

Need Help Choosing A Duct Seal?

Send us your duct and cable sizes and we will recommend the right seal.
Call +44 (0)161 874 1480, Monday to Friday 7.30am to 4.30pm.

Request A Quote

Your quote list

View full product details