Shake'N'Fill Re-Enterable Gel
Shake'N'Fill is a soft, re-enterable, clear general-purpose silicone elastomeric gel designed for use with electronic and electrical applications to protect against water, moisture, humidity, dust, vibrations and mechanical shock.
Shake‘N’Fill is a low viscosity, 2-component system that is easily mixed within a unique bottle that holds the catalyst in a separate compartment within the lid.
No more messing around mixing and stirring the components in a jug.
|Shake'N'Fill 150||x1 Bottle, 150ml
||Seals 1 x 308 WISKA Box|
|Shake'N'Fill 250||x1 Bottle, 250ml||Seals 2 x 308 WISKA Box|
x1 Bottle, 500ml
||Seals 4 x 308 WISKA Box
x1 Bottle, 1000ml
||Seals 8 x 308 WISKA Box
• Non-toxic and safe
• Quick & Easy to mix
• Fast in cross-linking (<10 min), without temperature increase
• Low viscosity
• Operating temperature: -50/+180°C
• Long shelf life
• Dielectric strength: >20 kV/mm
Filling & sealing junction boxes, electrical insulation connections up to 1 kV.
Material: Elastomeric Silicone
|Adhesion||Fully cured Shake‘N’Fill Gel exhibits good adhesion to most substrates such as: Aluminium, Stainless Steel, ABS, PCB Boards, Polycarbonate & Nylon 66.|
|Curing Time||Cross-links within 10 minutes. Full Cure: At 25 degrees, the full curing time is 1 hour. The curing times reduce with higher temperature.|
|Handling Time||Once the two components have been mixed by shaking the bottle, the handling time is between 3 & 5 minutes|
|Electrical Properties||Dielectric strength: 20.52 kV/mm according to CEI EN 602431 standard. Volume Resistivity: 2.0E+15 .cm according to CEI 1523 standard.|
|Cured Gel Properties||After 7 days cure at 23+/-2°C and 65% relative humidity.
Penetration (Cone Weight): 19.5/6.0mm.
Specific Gravity: Part A1 0.97.
Min. Service Temperature: -50°C.
Max. Service Temperature: 180 °C.
|Instructions||1. Remove the grey clip at the bottom of the cap.
2. Screw the cap until the internal seal breaks, approx 2 full rotations.
3. Shake the bottle for at least 15 seconds.
4. Unscrew the cap to pour the gel.
|Type of WISKA
|Required Shake'N'Fill Gel|
|Combi 108 (Empty) fixed to a wall||200ml|
|Combi 206 (Empty) fixed to a wall||100ml|
|Combi 304 (Empty) fixed to a wall||180ml|
|Combi 308 (Empty) fixed to a wall||200ml|
|Combi 407 (Empty) fixed to a wall||320ml|
|Combi 607 (Empty) fixed to a wall||510ml|
|Combi 1010 (Empty) fixed to a wall||1010ml|
|Combi 1210 (Empty) fixed to a wall||1250ml|
|Combi 1610 (Empty) fixed to a wall||2500ml|