Shake'N'Fill Re-Enterable Gel
Description
Shake'N'Fill is a soft, re-enterable, clear general-purpose silicone elastomeric gel designed for use with electronic and electrical applications to protect against water, moisture, humidity, dust, vibrations and mechanical shock.
ShakeāNāFill is a low viscosity, 2-component system that is easily mixed within a unique bottle that holds the catalyst in a separate compartment within the lid.
No more messing around mixing and stirring the components in a jug.
Just ShakeāNāFill.Ā
| Part No. | Size |
Usage |
|---|---|---|
| Shake'N'Fill 150 | x1 Bottle, 150ml |
Seals 1 x 308 WISKA Box |
| Shake'N'Fill 250 | x1 Bottle, 250ml | Seals 2 x 308 WISKA Box |
| Shake'N'Fill 500 |
x1 Bottle, 500ml |
Seals 4 x 308 WISKA Box |
| Shake'N'Fill 1000 |
x1 Bottle, 1000ml |
SealsĀ 8 x 308 WISKA Box |
Ā
Specifications
ā¢ Non-toxic and safe
ā¢ Quick & Easy to mix
ā¢ Fast in cross-linking (<10 min), without temperature increase
ā¢ Low viscosity
ā¢ Operating temperature: -50/+180Ā°C
ā¢ Re-enterable
ā¢ Long shelf life
ā¢ Dielectric strength: >20 kV/mm
Applications
Filling & sealing junction boxes, electrical insulation connections up to 1 kV.
Material:Ā Elastomeric Silicone
Colour:Ā Clear
Ā
TechnicalĀ Data
| Adhesion | Fully cured ShakeāNāFill Gel exhibits good adhesion to most substrates such as: Aluminium, Stainless Steel, ABS, PCB Boards, Polycarbonate & Nylon 66. | ||
|---|---|---|---|
| Curing Time | Cross-links within 10 minutes. Full Cure: At 25 degrees, the full curing time is 1 hour. The curing times reduce with higher temperature. | ||
| Handling Time | Once the two components have been mixed by shaking the bottle, the handling time is between 3 & 5 minutes | ||
| Electrical Properties | Dielectric strength: 20.52 kV/mm according to CEI EN 602431 standard. Volume Resistivity: 2.0E+15 .cm according to CEI 1523 standard. | ||
| Cured Gel Properties | After 7 days cure at 23+/-2Ā°C and 65% relative humidity. Penetration (Cone Weight): 19.5/6.0mm. Specific Gravity: Part A1 0.97. Min. Service Temperature: -50Ā°C. Max. Service Temperature: 180 Ā°C. |
||
| Instructions | 1. Remove the grey clip at the bottom of the cap. 2. Screw the cap until the internal seal breaks, approx 2 full rotations. 3. Shake the bottle for at least 15 seconds. 4. Unscrew the cap to pour the gel. |
||
Ā
Filling Guide
| Type of WISKA COMBI Box |
Required Shake'N'Fill Gel | |
|---|---|---|
| Combi 108 (Empty) fixed to a wall | 200ml | |
| Combi 206 (Empty) fixed to a wall | 100ml | |
| Combi 304 (Empty) fixed to a wall | 180ml | |
| Combi 308 (Empty) fixed to a wall | 200ml | |
| Combi 407 (Empty) fixed to a wall | 320ml | |
| Combi 607 (Empty) fixed to a wall | 510ml | |
| Combi 1010 (Empty) fixed to a wall | 1010ml | |
| Combi 1210 (Empty) fixed to a wall | 1250ml | |
| Combi 1610 (Empty) fixed to a wall | 2500ml | |