Hawke Transit Systems

Description Rectangular Civil Frame with flange.Made in 6mm thickness steel with 60mm flange.   Available in four standard sizes 120 width, 2,4,6,...

Description Rectangular civil frame with 60mm flange and removable end which allows installation around existing cables. Made in 6mm thickness stee...

Description Hawke HF tolerant blocks are designed to accommodate cables/pipes passing through the frame. Their special design incorporates five con...

Description Hawke HF blank modules are designed to fill spaces within the frame which are not required for services, thus allowing spare capacity f...

Description Hawke trefoil blocks are used to accommodate three single phase power cables within the same block. This negates eddy currents being in...

Description Hawke HRTO is a round fire resistant sealing solution for multiple cables/pipes passing through a circular aperture in a wall or bulkhe...

Description Hawke HRST is a round fire-resistant sealing solution for a single cable/pipe passing through a wall or bulkhead/deck. Each size of HRS...

Description The Unique Hawke Compression System is used in rectangular frames to compress and seal the installation of cables/pipes within HF modul...

Description Stayplates ensure the blocks in a Hawke rectangular system (tolerant and blank ones) are fixed in position after compression. A staypl...

Description This re-usable compression tool is designed to apply compression to the system before placing the endpacker within the frame.This makes...

Description The Puller Tool (Ref. 980) is used to facilitate the modification or dismantling of an installation.This re-usable tool is designed to ...

Description Hawke Lubricant (Ref. 967) is used to facilitate positioning the blocks and elements of a transit during an installation. The lubricant...

Description Hawke Mastic (Ref. 966) is used to secure installation in civil bolted frames and sleeves. Mastic should be applied between the flange...